Project 6 - REFINEMENT

In week 6 , we are given a  new project whereby we do not need to draw so much. That's was a very good news to me cause honestly i don't really like drawing and coloring.

After project blueprint , the next project is handle by Dr Radzi Ismail which is also my studio master in construction management course.He is quite expectant that we do every project in nice and tidy way .But to me , he is a very good lectures. I feel he is very patient to all of us and everyday bring 'smile' during our discussion .Any question i asked him , he will explain and answered me .Teach us a lot and give guidelines to us .

During the briefing : 

"Given Format from Dr Radzi "

"We are required to prepare a mind mapping complete with all relevant charts and figures from inception stage until occupation stage based on RIBA"

"The mind mapping should present the process and my role in project development stage and use our creativity to develop the mind mapping"

Getting started to do the projects :

"As i knew before any projects start , we need to prepare a mind mapping . So that we clearly knew what we should handle .It is very important in a project development."

After i graduate , i will be working in a construction field and gain experience to become a project manager .So , in this project i am choosing ''Project Manager in Construction''. 

Project Manager in Construction

" I went through the internet to search for symbol  to add into my project ."

...and also searching for the information regarding RIBA which i really didn't heard of it before.From what i had found is , RIBA stands for ROYAL INSTITUTE OF BRITISH ARCHITECTS."

RIBA

 

 In my projects i included RIBA as below.

1. Preparation Stage

• A - Appraisal >> Accept appointment from client , Arrange appointment with client , gather with client and all team member to obtain information & requirement.                       

• B - Design Brief >> Discuss with design consultant  on project , evaluate brief from client and advice client , evaluate all the data from design consultant.

2. Design Stage

• C - Concept >> Make sure all the needs and requirement  of client.
• D - Design Development >> ensure the design and specification is complied accordingly .
• E - Technical Design >> 

3. Pre-Construction Stage

• F - Production Information >> Advice Client on the time impact and cost if there is any changes from the requirement.
• G - Tender Documentation >> 

• H - Tender Action >> Asists client evaluate the selected contractor in term of capability, resources , experience , past project record and cash flow.

4. Construction Stage

• J - Mobilisation >>

• K - Construction to Practical Completion >> Held a site meeting with contractor regarding the site progress , held meeting with client about technical issue  and decision making , monitor and controlling the site of  the quality control .

5. Use Stage

• L - Post Practical Completion >> Ensure all the construction are complete by meeting with the contractor agreed.

"Lastly , i color the mind map and is complete. Yeah..!!!!!!!!!!!!!!!!!!"

Project Issued : 15 October 2012

Project Submission :9.00 am , 22 October 2012

Project 5 - BLUEPRINT

In week 5 , we are given a new project .But all related to the previous project which is Project 4 -Sculpture whereby we need to sketch , draw and colour .

Required to produce plan and elevations drawings :

• Front
• Right
• Left
• Rear       
• Axonometric

Besides that , we been told by our studio masters that we need to coloured axonometric drawing based on our sculpture .

Template :

Drawing Systems

Given Format and Example  

Started to draw

Preparation on material ^^

Scale Ruler, T-Square , Ruler ...etc

Pencil

Tape

Pencil Colour

Blueprint of my sculpture

"Doing the Coloring"

"Doing the Coloring part "

Front View

Back View

Side View - Right & Left

Plan View

Axonometric

"Final Touch up for my drawing "

"Yeah!! Complete...."

"That's my blueprint "

Project Issued : 08 October 2012

Project Submission :10.00 am , 15 October 2012

Project 4 - SCULPTURE

To me sculpture was a new word for me, because in my life i never heard of this words before after i been introduced by this new projects in week 4 ( 01 October 2012).

SCULPTURE - SUSTAINABLE

• Creation (from our  imagination )

Theme : Sustainable

Materials: (new/recylce)

Size : 250mm x 300mm x 450 mm

Description : Free Hand

Board : Attached the Sculpture on mounting board permanently

Given template in the projects briefing : 

---------------------------------------------------------------------------------------------------------------------

"Look up in the google to get some ideas on my new creation and i found ..:"

''Lamp''

 - made up of used plastic box and bottles

Incredible Creation music instruments (  Drum)
- made up of used aluminium tin 

''Chicken''
 - made from old newspapers ,  plastic bags and labels .

''Helicopter''
- made from (coke) aluminium tin

''Spider''
- made from light bulb

''Horse''
- made from Flattened tires 

- Also made from tires

"Slippers''
- made from Straws

''Human Structures''
- made from toys

''Cow''
- made from Cars

Recycle Car Art

''Horse''
- made from dry woods

 This is a life-like sculpture of a male snow owl .
- made from cotton

Pencil Sculpture
- made from pencil.

''Rooster''
- made from Spoon , Fork and Screw.

" Cat''
- made from Iron Tools

Sculpture made from Coins

''Guitar''

''Dog''

-made from Mechanical Tools

''Camera''
- made from cola aluminium tin




My Visit In A Paper Supplier

'' saw a horse at the entrance of the company''
- made up of paper

''Saw another sculpture in the office''
- made from recycle paper

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

My Final Decision

My final decision of making a  '' Wind Generator''
The reason why i decided to create a Wind Generator is based on the concept and theme of Sustainable.It might also called Wind Turbine . A wind turbine is a device that converts kinetic energy  from the wind, also called wind energy, into mechanical energy ; a process known as wind power. If the mechanical energy is used to produce electricity, the device may be called wind turbine or wind power plant. If the mechanical energy is used to drive machinery, such as for grinding grain or pumping water, the device is called a windmill or wind pump. Similarly, it may be called wind charger when it is used to charge batteries. 
Above all this function , it is all related to recycle and sustainable.Although wind generator is a very common to all of us  but i think this is the best device for the world and our next generation.

Preparation on  Materials

Magazine Paper

Cutter

Pen/Pencil /Pencil Colour

UHU Glue / Glue

Double Sided Tape

Stabler
Scissors 

 One McDonald's ( MCD) Cups

100's of  McDonald's ( MCD) Small Chili Plate

Aluminium Can 

Plastic Straw

Used Aluminium Can 

Aluminium Coke Can

Straw

McDonald's Cup and Straw

Plastic Chili Sos Plate

''My Tools''

---------------------------------------------------------------------------------------------------------------------

My  Sculpture

Plan View

Back View

Side View - Right

Side View - Left

Side View - Front 

" Add on some decoration on the mounting board "

WIND GENERATOR

"Time to hand up our Sculpture "

Project Issued : 01 October 2012

Project Submission :10.00 am , 08 October 2012